LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Optima EX, 2.7 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Meter) >> Satellite Switch >> Inspection

Satellite Switch: Inspection

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT SATELLITE SWITCH 
    1. Disconnect the connector from the satellite switch.
    2. Measure the resistance between the terminals according to the value(s) in the table below.

    Standard resistance 

    STANDARD RESISTANCE SPECIFICATION

    Tester Connection Condition Specified Condition
    J16-2 (LSET) - J16-5 (E) Satellite switch LH is pressed Below 1 Ω
    J16-2 (LSET) - J16-5 (E) Satellite switch LH is not pressed 10 kΩ or higher
    J16-3 (SET) - J16-5 (E) Satellite switch ON/ OFF is pressed Below 1 Ω
    J16-3 (SET) - J16-5 (E) Satellite switch ON/OFF is not pressed 10 kΩ or higher
    J16-4 (RSEL) - J16-5 (E) Satellite switch RH is pressed Below 1 Ω
    J16-4 (RSEL) - J16-5 (E) Satellite switch RH is not pressed 10 kΩ or higher
    Fig 1: Identifying Connector From Satellite Switch
    G04050070Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    HINT:

    If the value is not as specified, replace the satellite switch.

scientia non olet · About LEMON Manuals