DTC U0100 Can Mi-Com Or Circuit Mal.: DTC Detecting Condition

DTC CHART

Item	Detecting Condition	Possible cause
DTC Strategy	Check communication	Open or Short in CAN communication harness Faulty ECM Faulty TCM
Enable Conditions	Input speed ≥ 1000rpm and 5000msec passed from IG "on"
Threshold value	No message from ems
Diagnostic Time	1.5 sec
Fail Safe	INTELLIGENT SHIFT is inhibited Learning for oil pressure control is inhibited Torque Retard requirement is inhibited Direct connection control of TCC is inhibited

REFER TO DTC P0600 .