LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Magentis 2.7 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Cruise Control) >> Millimeter Wave Radar Sensor >> Removal

Millimeter Wave Radar Sensor: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation (See AIRBAG SYSTEM ).
  2. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
  3. REMOVE FRONT BUMPER ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 3 bolts and the millimeter wave radar sensor assembly.
Fig 1: Identifying 3 Bolts Of Millimeter Wave Radar Sensor Assembly
G04049293Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals