LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Magentis 2.7 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Air Conditioning) >> Blower Unit >> Disassembly

Blower Unit: Disassembly

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INLET CONTROL SERVO MOTOR 
    1. Detach the claw and remove the lever.
      Fig 1: Detaching Claw And Lever
      G04048448Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and inlet control servo motor.
    Fig 2: Identifying Screws And Inlet Control Servo Motor
    G04048449Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE CLEAN AIR FILTER 
    1. Detach the 2 claws and remove the air filter.

      HINT:

      Be sure to turn the engine switch on (IG) and set the A/C to RECIRCULATION mode before removing the air filter.

    Fig 3: Identifying Air Filter
    G04048450Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE COOLING UNIT WITH FAN MOTOR SUBASSEMBLY 
    1. Remove the 3 screws and fan motor.
    Fig 4: Identifying Screws And Fan Motor
    G04048451Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals