LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Magentis 2.7 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Door Lock) >> Entry Lock And Unlock Switch >> Removal

Entry Lock And Unlock Switch: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG (See  DISASSEMBLY  ) 
  2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See  DISASSEMBLY  ) 
  3. REMOVE COURTESY LIGHT ASSEMBLY (See  DISASSEMBLY  ) 
  4. REMOVE FRONT DOOR TRIM BOARD SUBASSEMBLY (See  DISASSEMBLY  ) 
  5. REMOVE FRONT DOOR TRIM COVER (See  DISASSEMBLY  ) 
  6. REMOVE FRONT DOOR SERVICE HOLE COVER (See  DISASSEMBLY  ) 
  7. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY (See  DISASSEMBLY  ) 
  8. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (See  DISASSEMBLY  ) 
  9. REMOVE FRONT DOOR OUTSIDE HANDLE SUBASSEMBLY 
    1. Remove the hole plug.
    2. Using a "torx" socket wrench (T30), loosen the screw and remove the front door outside handle cover and the door lock key cylinder as a unit.
      Fig 1: Identifying Hole Plug
      G04049966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      The screw cannot be removed because it is integrated into the front door outside handle frame sub-assembly.

    3. Disconnect the connector.
    4. Using a "torx" socket wrench (T30), loosen the screw.
      Fig 2: Door Outside Handle Subassembly, Connector And Screw
      G04051374Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the front door outside handle subassembly as shown in the illustration.
      Fig 3: Identifying Front Door Outside Handle Subassembly
      G04049968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals