LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Magentis 2.7 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Supplemental Restraint System) >> Seat Position Sensor >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (PROBLEM SYMPTOMS TABLE  ).
  2. INSPECT SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (PROBLEM SYMPTOMS TABLE  ).
    2. Even if the airbag was not deployed, check if there is any damage to the seat position sensor. If there are any defects as mentioned below, replace the seat position sensor with a new one:
      • Cracks, dents or chips on the sensor housing.
      • Cracks or other damage to the connector.
    CAUTION: Be sure to follow the correct removal and installation procedures.
scientia non olet · About LEMON Manuals