Data List / Active Test

HINT:

By accessing the DATA LIST displayed on the intelligent tester, you can perform such functions as reading the values of switches and sensors without removing any parts. Reading the DATA LIST as the first step in troubleshooting is one method to shorten labor time.

1. DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY 
   1. Connect the intelligent tester to the DLC3.
   2. Turn the engine switch on (IG).
   3. Following the display on the tester screen, read the "DATA LIST ".
   DATA LIST
   
   

   Item	Measurement Item/Range (Display)	Normal Condition	Diagnostic Note
   D SEAT POSITION	Seat position (Driver side)/FORWARD: Seat position is forward BKWARD: Seat position is backward FAIL: Failure detected	FORWARD/BKWARD	-
   PASSENGER CLASS	Passenger Classification/NG: Data is not determined OFF: Vacant CHILD: Child (less than 36 kg (79.37 lb)) is seated AF05: Adult (36 to 54 kg (79.37 to 119.05 lb) is seated AM50: Adult (more than 54 kg (119.05 lb)) is seated FAIL: A failure is detected	OFF/CHILD/AF05/AM50	-
   PASSENGER DETEC	Passenger detection/NG: Data is not determined NONE: No passenger DETECT: A passenger is seated FAIL: Failure detected	NONE/DETECT	-
   D BUCKLE SW	Buckle switch (Driver side)/UNSET: The seat belt is not fastened SET: The seat belt is fastened NG: Data is not determined	UNSET/SET	-
   L BUCKLE SW	Buckle switch (Left side)/UNSET: The seat belt is not fastened SET: The seat belt is fastened NG: Data is not determined	UNSET/SET	-
   P BUCKLE SW	Buckle switch (Passenger side)/UNSET: The seat belt is not fastened SET: The seat belt is fastened NG: Data is not determined	UNSET/SET	-
   R BUCKLE SW	Buckle switch (Right side)/UNSET: The seat belt is not fastened SET: The seat belt is fastened NG: Data is not determined	UNSET/SET	-
   DISPLAY TYPE	Display type identification information/LR: The display is indicated by LH/RH DP: The display is indicated by Driver/Passenger	DP	-
   PAST CODES	Number of past trouble codes/Min.: 0, Max.: 255	0	-