Rear Console Box: Disassembly

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE CONSOLE BOX CUP HOLDER SUB-ASSEMBLY
1. Remove the console box cup holder sub-assembly.
  
  Fig 1: Removing Console Box Cup Holder Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE: When removing the console box cup holder sub-assembly, do not hold the center part of the sub-assembly in order to prevent the cup holder from breaking.
REMOVE FRONT UPPER CONSOLE PANEL GARNISH
1. Using a molding remover, disengage the 2 claws.
2. Disengage the 4 claws and remove the front upper console panel garnish.
Fig 2: Removing Front Upper Console Panel Garnish
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
1. Remove the 2 screws.
  
  Fig 3: Removing Console Compartment Door Lock Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Open the console compartment door lock sub-assembly in the direction indicated by the arrow to remove it.
Fig 4: Opening Console Compartment Door Lock Sub-Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
1. While pushing down on the lock using a screwdriver with its tip taped, slide the console door in the direction shown by the arrow to remove it.
Fig 5: Removing Console Compartment Door Sub-Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE COMPARTMENT DOOR CUSHION
1. Remove the 2 console compartment door cushions from the console box.
REMOVE CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY
1. Disengage the 2 claws and remove the console box illumination light assembly.
Fig 6: Removing Console Box Illumination Light Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POWER OUTLET SOCKET ASSEMBLY (See Step 11 in REMOVAL )
REMOVE POWER POINT SOCKET COVER
REMOVE AUDIO TERMINAL (See Step 11 in REMOVAL )