LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Amanti >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System (Except TPMS) >> Front Suspension System >> Front Strut Assembly >> Disposal

Front Strut Assembly: Disposal

  1. Fully extend the piston rod.
  2. Drill a hole on the (A) section to discharge gas from the cylinder.
    Fig 1: Identifying Distance For Drilling Hole
    G04805399Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: The gas coming out is harmless, but be careful of chips that may fly when drilling. Be sure to wear safety goggles or eye protection when performing this task.
scientia non olet · About LEMON Manuals