LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2006 >> Spectra5 2.0 1, Standard >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) >> DTC P0101 Mass Or Volume Air Flow Circuit Range/Performance >> Component Inspection

Component Inspection

  1. Engine "ON".
  2. Install Scantool and monitor the "MASS AIR FLOW" parameter on the Scantool data list.

    Specification: Approx. 0.6~1.0V at idle & No load

  3. Is MAF sensor voltage near the specified value?

    YES 

    • Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Check MAF for contamination, deterioration, or damage. Substitute with a known-good MAF and check for proper operation. If the problem is corrected, replace MAF and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals