LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2006 >> Sorento EX, RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> MFI Control System >> Manifold Absolute Pressure (Map) Sensor >> Sensor Inspection (Map Sensor)

Sensor Inspection (Map Sensor)

  1. Connect the voltmeter between terminal Nos. 1 and 4 of the MAP sensor connector.
    • Terminal 4: MAP sensor ground
    • Terminal 1: MAP sensor output
  2. Measure the voltage of terminals.
    Fig 1: Identifying MAP Sensor Test Specification Table
    G00340381Courtesy of KIA MOTORS AMERICA, INC.
  3. If the voltage deviates from the standard value, replace the MAP sensor assembly.
scientia non olet · About LEMON Manuals