LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2006 >> Sedona LX >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P0447 EVAP. Emission System-Vent Control Circuit Open >> Actuation Test

Actuation Test

  1. Connect scantool on the DLC ( Data Link Connector).
  2. Perform Actuation Test for Canister Vent Solenoid Valve with scantool.
  3. Check that clicking sound can be heard by actuation test.
    Fig 1: Scan Tool Display Screen - Actuation Test
    G04883472Courtesy of KIA MOTORS AMERICA, INC.
  4. Is the CCV normal ?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, ending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO 

scientia non olet · About LEMON Manuals