LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2006 >> Sedona LX >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical >> Cooling System >> Cap Testing

Cap Testing

  1. Remove the radiator cap, wet its seal with engine coolant, then install it no pressure tester.
    Fig 1: Testing Radiator Cap
    G04803647Courtesy of KIA MOTORS AMERICA, INC.
  2. Apply a pressure of 93-123 kPa (0.95-1.25 kgf/cm2 , 14-19 psi)
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.
scientia non olet · About LEMON Manuals