LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2006 >> Rio5 Standard >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) >> DTC P0336 Crankshaft Position Sensor A Circuit Range/Performance >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Key "OFF".
  2. Disconnect CKPS connector.
  3. Key "ON".
  4. Measure the voltage between terminal 1 of CKPS harness connector and chassis ground. Then, measure the voltage between terminal 2 of CKPS harness connector and chassis ground.

    Specification: Approx 2.5V

  5. Is the measured voltage within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals