LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2006 >> Rio Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (SRS Control System) >> Seat Track Position Sensor (STPS) >> Removal

Seat Track Position Sensor (STPS): Removal

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front seat assembly. (Refer to SEATS )
  3. Loosen the two STPS screws, then remove the STPS after disconnecting the STPS connector.
    Fig 1: Locating Seat Track Position Sensor
    G04883730Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals