Wheel Alignment: Caster

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Caster is the tilting of the strut axis either forward or backward from vertical. A backward tilt is positive (+) and a forward tilt is negative (-).

Caster is pre-set at the factory and doesn't need to be adjusted. If the caster is not within the standard value, replace the bent or damaged parts.

Caster: 4°05' ± 30' (to ground), 4°40' (to body)

Fig 1: Identifying Caster Angle

Courtesy of KIA MOTORS AMERICA, INC.

NOTE:

The worn loose or damaged parts of the front suspension assembly must be replaced prior to measuring front wheel alignment.
Caster are pre-set to the specified value at the factory and don't need to be adjusted.
If the caster are not within specifications, replace bent or damaged parts.
The difference of left and right wheels about the caster must be within the range of 0° 30'.