LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2006 >> Amanti >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Hydraulic Pressure Circuit >> ATF Checking >> Checking Vehicle Speed Sensor

Checking Vehicle Speed Sensor

  1. The sensor will detect the vehicle running speed at speedometer's gear part.
  2. Remove the speed sensor and measure resistance as shown on fig.

    Standard value: 3 - 10 kohm

    Fig 1: Measuring Vehicle Speed Sensor Resistance
    G03876980Courtesy of KIA MOTORS AMERICA, INC.
  3. Turn axis of the speed sensor and check the output voltage between terminal No.2 and 1.

    (1 rev=4pulses)

scientia non olet · About LEMON Manuals