LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2005 >> Sorento EX, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Fuel System & Fault Isolation >> MFI Control System >> Idle Speed Control Actuator >> Actuator Inspection

Actuator Inspection

  1. Disconnect the connector at the idle speed control actuator.
  2. Measure the resistance between terminals.

    Standard value at terminal 1-3, 4-6: 3650-39500 ohms at 20°C (68°F)

    Fig 1: Idle Speed Control Actuator Resistance Test Procedure
    G00340421Courtesy of KIA MOTORS AMERICA, INC.
  3. Connector the connector to the idle speed control actuator.
scientia non olet · About LEMON Manuals