LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2005 >> Sorento EX, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P0630: VIN Not Programmed Or INCOMPACTIBLE >> Scantool Diagnostics >> Monitor Scantool Data

Monitor Scantool Data

  1. Ignition "OFF".
  2. Connect Scantool and Engine "ON".
  3. Monitor the ECM status whether it is virgin or learned.
  4. Is the ECM status Virgin?

    YES

    NO

    • Fault is intermittent caused by poor contact in Sensor's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals