LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2005 >> Rio Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures >> DTC Troubleshooting >> DTC P0101: Mass Or Volume Air Flow Circuit Range Performance Problem >> Inspection/Repair >> W/Harness Inspection >> System Inspection

System Inspection

Air Cleaner Inspection

  1. Check air cleaner condition. Is air cleaner clogged with dirt?

    YES

    1. Replace air cleaner and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO

    1. Go to "AIR LEAKAGE INSPECTION" procedure.

Air Leakage Inspection

  1. Check intake tube, breather hose and MAFS for source of any air leaks. Are there any cracks in intake tube, MAFS or breather hose.
  2. Verify oil cap and dipstick are properly installed and oil cap screwed on completely.
  3. Has a problem been found?

    YES

    1. Repair or Replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO

    1. Go to "TPS INSPECTION" procedure.

TPS Inspection

  1. Ignition "ON" & Engine "OFF".
  2. Install Scantool and monitor the "TPS VOLTAGE" parameter on the Scantool data list.
    1. Specification: Approx. 0.25~0.80V (Closed throttle Valve)/Approx 4.0~4.4V (Wide Open Throttle)
  3. Is "TPS VOLTAGE" within specification?

    YES

    1. Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.

    NO

    1. Inspect TP sensor and W/harness and repair or replace as necessary. Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals