Malfunction Indicator Light (Mil)

An On Board Diagnostic lamp comes on to notify the driver that there is any problem on the vehicle.

However MIL will go off automatically after 3 subsequent sequential driving cycles did not detect same malfunction.

Immediately after the ignition switch turns on, the malfunction indicator light is lit for 5 seconds to indicate that the malfunction indicator light operates normally.

Following items will be indicated by the MIL:

• Catalyst
• Fuel system
• Mass Air Flow (MAF) Sensor
• Intake Air Temperature Sensor (ATS)
• Water Temperature Sensor (WTS)
• Throttle Position Sensor (TPS)
• Upstream Oxygen Sensor
• Downstream Oxygen Sensor Heater
• Downstream Oxygen Sensor
• Upstream Oxygen Sensor Heater
• Injector
• Misfire
• Crankshaft Position (CKP) Sensor
• Camshaft Position (TDC) Sensor
• Evaporative Emission Control System
• Vehicle Speed Sensor (VSS)
• Idle Speed Control
• ECU
• Manifold Absolute Pressure (MAP) Sensor
• EGR System