LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2004 >> Spectra Base, 1.8 1, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.0L 4-Cylinder Engine) >> Cooling System >> Service & Testing >> Testing >> Radiator Cap Testing

Radiator Cap Testing

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator cap, wet its seal with engine coolant, then install it no pressure tester.
    Fig 1: Testing Radiator Cap
    G00719179Courtesy of KIA MOTORS AMERICA, INC.
  2. Apply a pressure of 93.16 ~ 122.58 kpa (0.95 ~ 1.25 kg/cm2 , 13.51 ~ 17.78 psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.
scientia non olet · About LEMON Manuals