LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2004 >> Sorento EX, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Fuel System & Fault Isolation >> MFI Control System >> Water Temperature Sensor (WTS) >> Installation

Water Temperature Sensor (WTS): Installation

  1. Apply sealant LOCTITE 962T or the equivalent to the threaded portion.
  2. Install the water temperature sensor and tighten it to the specified torque.

    Tightening torque: 20-40 N.m (200-400 kg. cm, 14-29 lb. ft)

  3. Securely connect the harness connector.
scientia non olet · About LEMON Manuals