Troubleshooting Procedures

First, select the applicable malfunction symptom. See TROUBLE SYMPTOM CHARTS  .

Determine the condition of all function circuits.

1. Make that following preliminary inspections.
   • Check that the installation of the accelerator cable is correct, and that the cables and links are securely connected.
   • Check that the accelerator pedal moves smoothly.
   • Adjust the cable so there is not excessive tension or excessive play on the accelerator cable.
   • Check that the CCM, cruise main and control switch, and the connector of each cancel switch are connected securely.
2. Check in the sequence indicated in TROUBLE SYMPTOM CHARTS  .
3. If these checks indicate a normal condition, replace the cruise control module. See CRUISE CONTROL MODULE  .