LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2004 >> Magentis SE, 2.4 6 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper Arm >> Link Assembly >> Installation

Link Assembly: Installation

  1. Install two bolts on wiper motor and link assembly.
  2. Connect wiper motor harness connector.
  3. Place cowl vent in position and install nuts and fasteners.
  4. Install wiper arms and blades. See WIPER ARM .
  5. Check system movement. Wiper arms should stop 1.18 inch (30 mm) on driver side, and 1.46 inch (37 mm) on passenger side. Stopping point is measured from lower windshield edge.
scientia non olet · About LEMON Manuals