LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2004 >> Amanti >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Diagnosis & Overhaul >> Testing >> Transmission Controls >> Control Cable Checking

Control Cable Checking

  1. Press the brake pedal and engage the parking brake completely.
  2. Move the shift lever at position "R".
  3. Turn the engine start switch to position "ST".
  4. Move the shift lever to position "P".

    If starter motor operates when it clicks, control cable is adjusted correctly.

  5. With the same manner, move the shift lever to position "N". If the starter motor operates, it is correct.
  6. If the starter motor operates at position "P" and "N" as described above and does not operate at any other position, then the control cable is adjusted properly.
scientia non olet · About LEMON Manuals