LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2003 >> Sorento EX, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications >> Wheel Alignment Procedures >> Camber Adjustment >> Inspection

Camber Adjustment: Inspection

  1. Position the vehicle so that the front wheel is on the turning-radius gauge. Remove wheel cover. Attach the standard camber gauge to the hub and measure the camber. See Fig 1.
  2. Compare measurement with manufacturer's specification. See WHEEL ALIGNMENT SPECIFICATIONS . If measurements are within specification, no adjustment is necessary. If measurements are not within specification, see ADJUSTMENT PROCEDURE .
Fig 1: Checking Camber & Caster
G00285398Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals