LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2003 >> Sorento EX, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Axle Assembly >> Repair Procedures >> Run Out Inspection

Run Out Inspection

  1. Remove two bolts and remove brake caliper from brake rotor. Temporarily tie caliper to vehicle frame with wire.
  2. Mount dial indicator with plunger zeroed against brake rotor at 4.7 inch (12 cm) from rotor center.
    Fig 1: Mounting Dial Indicator With Plunger Zeroed Against Brake Rotor At From Rotor Center
    G06409382Courtesy of KIA MOTORS AMERICA, INC.
  3. Turn rotor and read dial indicator for run out dimension.

    Run out not to exceed 0.0012 in (0.03 mm)

scientia non olet · About LEMON Manuals