DTC P1307: Chassis Acceleration Sensor Signal Malfunction, DTC P1308: Chassis Acceleration Sensor Signal Low Input & DTC P1309: Chassis Acceleration Sensor Signal High Input: Notes

NOTE: Before performing any DIAGNOSTIC TEST, refer toWARNINGS, CAUTIONS and NOTES in DIAGNOSTIC TESTS .

NOTE: Testing individual components does not isolate shorts or opens. Perform all voltage tests using a Digital Volt-Ohmmeter Meter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Use ohmmeter to isolate wiring harness shorts or opens.