LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2002 >> Spectra Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> O/D Switch >> Installation

O/D Switch: Installation

  1. Feed wires through sleeve and panel. Insert wires into connector. Install panel.
  2. Install sleeve over shift selector lever. Adjust wires (from bottom of sleeve) until shift selector knob can be set in place.
    NOTE: Wires must go through groove in shift selector knob.
  3. Install 2 shift selector knob screws. Install light bulb.
  4. Install connector and secure wires in provided plastic molding slots. See Fig 1 .
  5. Install panel mounting screws.
Fig 1: Installing O/D Switch Terminals Into Connectors
G00148367Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals