Front Stabilizer & Control Link: Installation
- Align the stabilizer bushing with the clamp on the stabilizer bar. Locate the bushing adjacent to the position line on stabilizer bar.
- Position stabilizer behind subframe.
- Raise the subframe into place and tighten 6 mounting bolts. See TORQUE SPECIFICATIONS .
- Tighten 2 stabilizer bracket bolts. See TORQUE SPECIFICATIONS .
- Install the stabilizer bar to the stabilizer control link. See TORQUE SPECIFICATIONS .
NOTE:
Tighten the 2 control link nuts to specified torque before lowering the vehicle.
NOTE:
Check caster and camber.