LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2002 >> Optima SE, 2.7 8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Wiper/Washer System) >> Windshield Wiper/Washer >> Wiper Arm >> Link Assembly >> Installation

Link Assembly: Installation

WARNING: This page is about a different car, the 2001 Kia Optima and 2001 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install two bolts on wiper motor and link assembly.
  2. Connect wiper motor harness connector.
  3. Place cowl vent in position and install nuts and fasteners.
  4. Install wiper arms and blades. See Figure.
  5. Check system movement. Wiper arms should stop 1.18 inch (30 mm) (Driver side) and 1.46 inch (37 mm) (Passenger side) from lower windshield edge.
scientia non olet · About LEMON Manuals