Rear Wheel Alignment Inspection

Toe-in
Standard value: 2 +/- 2 mm

NOTE: The assist arm mounting bolt (crossmember side) should be turned an equal amount on both sides when adjusting.

Fig 1: Adjusting Rear Wheel Alignment
Courtesy of KIA MOTORS AMERICA, INC.

Inside direction of the vehicle: toe-in

Outside direction of the vehicle: toe-out

The scale has gradations of approximately 2.4 mm (14').
camber
Standard value: (-30' +/- 30')
NOTE:
1. The rear suspension assembly must be free of worn, loose or damaged parts prior to measuring rear wheel alignment.
2. Camber is preset at the factory and cannot be adjusted.
3. If camber is not within the specifications, replace bent or damaged parts.