Traction Control: Anti-Lock
- General
- HECU (Hydraulic And Electronic Control Unit)
- Wheel Speed Sensor
- Troubleshooting
- Standard Flow Of Diagnostic Troubleshooting
- Notes With Regard To Diagnosis
- Hi-Scan Check
- Connector Check
- Inspection Chart For Diagnostic Trouble Codes
- Abs Diagnostic Trouble Codes
- Actuator Driving
- Current Data
- Inspection Procedure For Diagnostic Trouble Codes
- DTCs C1200, C1203, C1206 & C1209: Wheel Speed Sensor Open Or Short To GND Circuit
- DTCs C1201, C1204, C1207 & C1210: Speed Jump Or Wrong Exciter
- DTCs C1202, C1205, C1208 & C1211: Air Gap Error
- DTC C1103: Voltage Out Of Range (Under And Over Voltage
- DTC C1604: ECU Hardware (Error Value Failure)
- DTC C2112: Valve Relay (Including Fuse Failure)
- DTCs C1605 & 2114: CAN Hardware Error & Disturbance
- DTCs C1611, C1612 & C1613: CAN Timeout EMS, CAN Timeout TCM & CAN Transmission Unmatching
- DTC C1610: CAN Bus Off Error
- DTC C2402: Electrical (Pump Motor)
- Abs Warning Lamp Inspection
- Inspection Chart For Trouble Symptoms
- Inspection Procedure For Trouble Symptoms
- Abs Operation Check