LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2002 >> Optima LX, 2.7 8 >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 2.7L V6 Engine >> Main Moving System >> Connecting Rod & Piston >> Inspection >> Connecting Rod

Connecting Rod

  1. When the connecting rod cap is installed, make sure that cylinder numbers put on the rod end cap at disassembly match.

    When a new connecting rod is installed, make sure that the notches for holding the bearing in place are on the same side.

  2. Replace the connecting rod if it is damaged on the thrust faces at either end, and also if it has a step wear in, or severely rough surface of the inside diameter of the small end.
scientia non olet · About LEMON Manuals