Specifications Index
OPTIMA SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | N/A | ||
| Axle Nut/Hub Nut | 148-192 ft. lbs. (201-260 N.m) | ||
| Battery | N/A | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING PROCEDURE | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | GENERATOR OUTPUT TEST | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | N/A | ||
| Engine Cooling | |||
| General Service Specifications (Capacity) | |||
| 2.4L | 7.7 Qts. (7.3L) | ||
| 2.5L | 9.1 Qts. (8.6L) | ||
| Radiator Cap Pressure | |||
| Main Valve Opening Pressure | 14-18 psi | ||
| Main Valve Closing Pressure | 12 psi | ||
| Thermostat R & I | |||
| 2.4L | THERMOSTAT | ||
| 2.5L | N/A | ||
| Water Pump R & I | |||
| 2.4L | WATER PUMP | ||
| 2.5L | WATER PUMP | ||
| Engine Mechanical | |||
| 2.4L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | Oil pressure is 11.4 psi (.80 kg/cm2 ) at idle with oil temperature at 167-194°F (75-90°C). | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 2.5L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | At curb idle and with oil temperature 167-194°F (75-90°C), normal oil pressure should be at least 11.4 psi (0.8 kg/cm2 ). | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| Flexplate-To-Crankshaft Bolt | 53-55 ft. lbs. (73-77 N.m) | ||
| Flywheel-To-Crankshaft Bolt | N/A | ||
| Fuel System | |||
| Fuel Filter Location | FUEL FILTER | ||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Pressure Release Procedure | FUEL PRESSURE RELEASE | ||
| Fuel Filter R & I | FUEL FILTER | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | N/A | ||
| Spark Plug | SPARK PLUGS | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 67-81 ft. lbs. (90-110 N.m) | ||