LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2000 >> Sephia LS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 1.8L 4-Cylinder Engine >> Engine Oiling >> Oil Pump >> Removal

Oil Pump: Removal

  1. Disconnect negative battery cable. Drain engine oil. Remove timing belt. See TIMING BELT  under REMOVAL & INSTALLATION. Remove oil pan and strainer. See OIL PAN  under REMOVAL & INSTALLATION. Remove generator.
  2. Remove A/C compressor and mounting bracket (if equipped) from engine block. Remove crankshaft pulley lock bolt. Remove timing belt pulley. Remove oil pump mounting bolt. Remove oil pump.
  3. Remove front oil seal. Carefully clean all gaskets and sealant from mating surfaces without damaging sealing/mating surfaces. Remove all sealant from components and bolts. Check oil pump clearances. See OIL PUMP SPECIFICATIONS  table. Replace oil pump as necessary.
scientia non olet · About LEMON Manuals