LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 1998 >> Sephia LS, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Motor Regulator Assembly >> Installation

Window Motor Regulator Assembly: Installation

  1. Install window motor regulator assembly through access hole in door. Tighten regulator mounting nuts to 97 INCH lbs. (11 N.m). Reconnect window motor harness connector.
  2. Install window glass by tilting toward hinge side of door. Place glass on small bracket on window regulator. Loosely install 2 window-to-regulator bolts. Reconnect window switch and negative battery cable.
  3. Turn ignition on and operate window up and down to ensure correct operation. Tighten window-to-regulator bolts to 53 INCH lbs. (6 N.m). Tighten glass guide bolt to 84 INCH lbs. (9.5 N.m). To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals