LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 1997 >> Sephia GS, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Trouble Shooting >> Auto-Down Feature Inoperative >> Circuit Testing

Circuit Testing

  1. Turn ignition on. Using a voltmeter, backprobe between ground and pin No. 3 (Green wire) at master power window switch. Depress left front control button fully, then release to activate auto-down mode. If battery voltage exists, go to next step. If battery voltage does not exist, or changes to zero volts before window is fully lowered, replace master power window switch. Retest system.
  2. Repeat step 1) while checking for battery voltage between pins No. 3 (Green wire) and No. 5 (Red wire) at master power window switch. If battery voltage is not present, or changes to zero volts before window is fully lowered, replace master power window switch andretest system.
scientia non olet · About LEMON Manuals