With Shift Pattern Indicator
Disconnect TR switch 9-pin connector. Using an ohmmeter, check continuity between specified TR switch terminals. See TRANSMISSION RANGE SWITCH CONTINUITY W/SHIFT PATTERN INDICATOR . Replace TR switch if continuity is not as specified. SeeFig 1 .
TRANSMISSION RANGE SWITCH CONTINUITY W/SHIFT PATTERN INDICATOR
| Transmission Position | Continuity Between Terminals No. |
|---|---|
| Park | 1 & 5; 6 & 9 |
| Neutral | 5 & 7; 6 & 9 |
| Reverse | 2 & 5 |
| Drive | 4 & 5 |
| "2" | 5 & 8 |
| "1" | 3 & 5 |