Steering Column Shroud

REMOVAL 

1. Remove the steering wheel from the steering column. Refer to WHEEL, STEERING, REMOVAL AND INSTALLATION .
2. Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
3. Remove the instrument cluster bezel.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Instrument Cluster Bezel

4. Use a suitable tool to disengage the gap hider from the upper steering column shroud.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Upper Steering Column Shroud

5. Use a suitable tool to release the tabs and separate the upper shroud from the lower shroud.
6. If equipped with a steering wheel camera, lift the upper steering column shroud slightly.
7. Remove the steering column shroud screws.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Steering Column Shroud Screws

8. Remove the steering column shroud screws.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Steering Column Shroud Screws

9. Disengage the wire harness routing clips and remove the lower shroud.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Wire Harness Routing Clip

   2 - Wire Harness Routing Clip

10. If equipped with a steering wheel camera, disconnect the camera wire harness connectors and remove the upper shroud.

    Courtesy of CHRYSLER GROUP, LLC

    1 - Wire Harness Connector

    2 - Wire Harness Connector

11. If equipped with a steering wheel camera, remove the camera from the upper shroud.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.