LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2025 >> Grand Cherokee Overland >> Repair and Diagnosis >> Suspension >> Front Suspension And Wheel Alignment >> Front >> Diagnosis And Testing >> Spring Link Ball Joint

Spring Link Ball Joint

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Mount a dial indicator solidly to the steering knuckle.
  3. Position the indicator plunger against the top surface of the spring link centered on the ball joint axis, then zero the dial indicator.
  4. Position a pry bar under the tire assembly. Pry upward on the tire assembly.
    NOTE: If movement for either the spring link ball joint exceeds specifications, replacement of the spring link is necessary.
  5. If the travel exceeds 0.1 mm (0.004 in.). Refer to LINK, SPRING, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals