Programming And Calibration: CADM

When a CADM is replaced, the following procedures need to be performed using the scan tool:

1. Perform the PROXI configuration
2. Perform the Long Range Radar calibration. The routine is called the CADM Long Range Radar Static/In Bay Calibration Routine  located in the "Misc. Functions" tab in the CADM.
   NOTE:

   The routine requires the (special tool #2076800080, ADAS Calibration System).

3. Perform the Long Range Front Camera calibration. The routine is called the "Forward Facing Camera Dynamic Service Alignment". This is a drive style routine. This routine is to be used only for the Long Range Front Camera on the windshield.