Power Outlets
| Refer to COMPONENT INDEX . |
12 Volt Outlet
The power outlet base or receptacle shell is connected to ground, and an insulated contact in the bottom of the shell is connected to battery current. The BCM provides an ignition relay control input to the PDC when the ignition is in the ON or ACC positions. The PDC then provides the power outlet with DC battery voltage.
The direct battery supplied power outlet provides power as long as the battery provides the power to the vehicle electrical system.
The direct battery supplied power outlet is capable of providing at least 15 amps of continuous DC.
The switched power outlet is controlled by the ACC relay located in the PDC. This type of switched power outlet provides power when the vehicle is operating in the Power Accessory Delay (PAD), ACC, RUN, Auto Stop/Start and remote start active modes. The switched power outlet also is capable of providing at least 15 amps of continuous DC.
Each outlet is fused individually and works independently. The grounding path for each outlet is not shared with other vehicle components.
115 Volt Outlet
The interior outlet detects activity when plugged into. When either outlet is plugged into, the other interior outlet will also become active and a Local Interface Network (LIN) bus message is sent to the IPC for illumination.