Module Programming

Pre-June 7th 2021 Build  Vehicles built prior to June 7th will be equipped with a Tire Pressure Monitoring System (TPMS) Module.

Post-June 7th 2021 Build  The Tire Pressure Monitoring system for vehicles built after June 7th 2021 is integrated by the Radio Frequency Hub (RF Hub). A "Dummy" TPMS module may be installed with the purpose of being a pass-through for the CAN communication lines. The "Dummy" TPMS module cannot be communicated with and is not a factor in the Tire Pressure Monitoring. The programming will reside within the RF-Hub for these models.

Using special tool # 2046300080, (TPM/RKE ANALYZER Kit) and the scan tool, navigate to the TPM system module and then its "Miscellaneous Functions" menu to select and perform the following procedures:

1. Program Left Front Tire Sensor ID
2. Program Left Rear Tire Sensor ID
3. Program Right Front Tire Sensor ID
4. Program Right Rear Tire Sensor ID