3.6L (GPEC 2A) - DTCS U1133 To U11C2

• DTC Troubleshooting
  • U1133-Lost Stop/Start Switch 1 Message
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U1134-Lost Stop/Start Switch 2 Message
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U113E-Lost Communication With Intelligent Battery Sensor
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U1141-Lost-Esp-Torque-Request-Message
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U115F-Lost Communication With Driver Presence Detection Module
  • U1186-Lost Communication With Adaptive Cruise Control Module
  • U1199-Lost Hood Ajar Switch Voltage Message
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U11BC-Lost Brake Switch Message
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U11BF-Lost Brake Pedal Position Message
    • Description And Operation-Braking Systems
    • Component Functional Description - 3 Wire Brake Pedal Position Sensor
    • Component Functional Description - Hydraulic Control Unit (HCU) Assembly
    • Component Functional Description - Wheel Speed Sensors
    • Component Functional Description - Steering Angle Sensor
    • Component Functional Description - Brake System Control Module (BSCM)
    • Technical Data-Braking System Messages
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Overview
    • Check For An Active Or Intermittent Condition
    • Diagnostic Test - Non-EBOOSTER Brake System - Pcm
    • Diagnostic Test-Wheel Speed Sensor Faults
  • U11C2-Lost Transmission Message
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test