| Bearing Cap Bolts |
108 N.m (80 Ft. Lbs.) |
- |
| Differential Cover Bolts |
Torque Procedure:
- Tighten to 20 N.m (15 Ft. Lbs.)
- Rotate additional 20°
|
Tightening Sequence
 Courtesy of CHRYSLER GROUP, LLC
|
| Differential Drain Plug |
34 N.m (25 Ft. Lbs.) |
- |
| Differential Fill Plug |
34 N.m (25 Ft. Lbs.) |
- |
| Front Axle Disconnect Skid Plate Bolts |
42 N.m (31 Ft. Lbs.) |
- |
| Front Axle Disconnect Bolts |
18 N.m (13 Ft. Lbs.) |
Do not reuse these fasteners. If removed, a NEW
fastener must be installed and tightened to specifications. |
| Pinion Flange Nut |
217 N.m (160 Ft. Lbs.) |
Do not reuse these fasteners. If removed, a NEW
fastener must be installed and tightened to specifications. |
| Ring Gear Bolts |
136 N.m (100 Ft. Lbs.) |
Do not reuse these fasteners. If removed, a NEW
fastener must be installed and tightened to specifications. |