Standard Procedure - Fluid Drain And Fill: Notes

DRAIN 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Remove the skid plate. Refer to PLATE, SKID, REMOVAL AND INSTALLATION .
3. Place drain pan beneath the transfer case.
4. Remove the fill and drain plugs and allow the fluid to drain.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Drain Plug

   2 - Fill Plug

5. Install the drain plug.

FILL 

1. Fill the transfer case to the proper level using the specified fluid. Refer to CAPACITIES AND RECOMMENDED FLUIDS, SPECIFICATIONS .
2. Install the fill plug.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Drain Plug

   2 - Fill Plug

3. Install the skid plate. Refer to PLATE, SKID, REMOVAL AND INSTALLATION .
4. Remove the support and lower the vehicle.