Lever, Transfer Case: Adjustments: Notes
- Shift transfer case into 4 HI.
- Remove the transfer case shift handle. Refer to HANDLE, REMOVAL AND INSTALLATION .
- Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION .
- Insert a dowel pin or 4.9 mm (3/16 in.) drill bit into the alignment hole on the shifter assembly that aligns the shifter assembly and shift lever.NOTE:
The 4.9 mm (3/16 in.) dowel pin prevents fore and aft movement of the shift lever and locks the shift lever in the 4 HI position for easy adjustment.
1 - Shifter Adjustment Nut 2 - Alignment Hole - Loosen the shifter adjustment nut.
- Apply rearward pressure to the shift lever and tighten the shifter adjustment nut securely.
- Verify transfer case operation.
- Install the floor console. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION .
- Install the transfer case shift handle. Refer to HANDLE, REMOVAL AND INSTALLATION .