Diagnostic Test

CHECK FOR AN ACTIVE DTC 

1. Turn the ignition on.
2. With a scan tool, read EHPS Module DTCs.

   Is the DTC active?

   Yes 

   • Replace and program the Electro-Hydraulic Power Steering (EHPS) Pump in accordance with the Service Information. Refer to MODULE, ELECTRO-HYDRAULIC POWER STEERING (EHPS), REMOVAL AND INSTALLATION .
   • Perform the EHPS VERIFICATION TEST. Refer to: EHPS VERIFICATION TEST  .

   No 

   • Test complete. The condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.